• Follow us
Stainless Steel Single Side Clad Sheet In Coil TP304/304L 316/316L

Stainless Steel Single Side Clad Sheet In Coil TP304/304L 316/316L

Applicable standard:
Clad plates: ASTM A264, ASME SA264
Base material: ASTM A516, ASME SA516
Clad material:ASTMA240, EN10088, JIS4305
Available range:
Thickness: Total thickness: 3.0-12.0mm, clad material total thickness: 0.3-2.0mm
Width: Max width :1250-1620mm(Typical specifications:1250mm,1520mm )

Description

Stainless Steel Single Side Clad sheet in Coil TP304/304L 316/316L


Description:

Single sided stainless steel use corrosion-resistant Austenitic stainless steel and high strength and high toughness of carbon steel Q235/Q345 clad rolling into the clad plates and the use of controlled rolling control technology to obtain good mechanical and corrosion resistance and other excellent comprehensive performance products.

 

Features:

1. Good Corrosion resistance

Corrosion Resistance and Pitting Corrosion Resistance of 304 Austenitic Stainless Steel Based on Coated Materials and Solid Solution 304 Austenitic stainless steel

2. Good shapeness

Generally, shaping is better than carbon steel substrate

3. Good weldability

The welding method of filler metal material is adopted to obtain the welding joint of excellent comprehensive performance.

4. Good combination

The basic material and coating material are the metallurgical combination of the atomic diffusion mode and cannot be separated.

5. Good economy

Economizing nickel, chromium and other precious metals, it is resource friendly.

 

Applicable standard:

Clad plates: ASTM A264, ASME SA264

Base material: ASTM A516, ASME SA516

Clad material:ASTMA240, EN10088, JIS4305

 

Available range:

Thickness: Total thickness: 3.0-12.0mm, clad material total thickness: 0.3-2.0mm

Width: Max width :1250-1620mm(Typical specifications:1250mm,1520mm )

 

Applicable fields:

Sanitation vehicles, water network pipes, building molds, storage tanks

 

Microstructure:

The base material carbon steel is the typical ferrite and perlite tissue, the cladding stainless steel is the whole austenitic body tissue, without the carbide precipitation, the section metallurgical combination.

 

Corrosion performance:

Uniform corrosion performance:

Neutral salt fog test, 240 hours without corrosion.

Pitting resistance:

The corrosion potential of stainless steel point is 0.03 V, which is equivalent to 304 stainless steel.

Intergranular corrosion performance:

ASTM detected the electrochemical reactivation test method of 304 and 304L stainless steel, and the detection of intergranular corrosion was equivalent to that of solid solution 304 stainless steel.

 

Welding performance

It is suggested that mechanical machining method can be used to process the groove and face up.

The welding parts are based on the complex layer, and the wrong side is not more than half of the thickness of the complex layer.

Cladding welding recommended use 309 l filler material, composite board thickness is less than 4 mm, base welding can choose and transition layer, the same weld cladding material, composite plate is greater than 4 mm, can increase the thickness of welding of excessive layer and base, finally USES the carbon steel welding material welding base material.


Products images: 

clad plate in coil                   clad sheet in coil


Package and Delivery:

stainless steel clad plate in coil                  stainless steel clad coil





If you are satisfied with our stainless steel single side clad sheet in coil tp304/304l 316/316l, please be free to place orders with our factory. Our company is one of the leading manufacturers and suppliers in China. We have many quality products for sale at your choice. Welcome to enjoy our competitive price and service.
Related Products

Feedback