• Follow us
Home > Knowledge > Content
Clad plate welding method and welding process
Mar 14, 2018


Welding methods:

Manual arc welding, submerged-arc welding, CO2 gas shielded welding are recommended for the base layer welding. For cladding layer and transition layer welding, it’s best to use argon tungsten-arc welding, manual arc welding or other methods that can guarantee the quality.


Welding process:

It’s better to start welding from the base layer, then the transition layer and finally the cladding layer. It’s possible to start welding form the cladding layer if the condition is restricted. In this case, welding material for the transition layer can be the used for the base layer if the plate is under 10mm thick. But if the plate thickness is over 10mm. It’s recommended to increase the throat thickness,(throat thickness of the transition layer≥5mm).


Related Products:


Hot rolled clad plates                                                          Cold rolled clad plates


Explosion clad plates                                                          Clad plates and Heads